V.T. Chemerys 1, cand. of techn. science, I.O. Borodiy 2
1 V.I. Vernadsky Taurida National University of Ukraine
Ukraine, 01042, Kyiv, 31 John MacCane Street,
tel. (063) 4897772, e-mail:
2 National Aviation University of Ukraine
Ukraine, 03680, Kyiv, 1 Cosmonaut Komarov Avenue,
tel. (044) 4067840, e-mail:
Èlektron. model. 2022, 44(2):26-37
https://doi.org/10.15407/emodel.44.02.026
ABSTRACT
The goal of this paper is to consider the pulsed magnetic field penetration into the metal with pre-created non-uniform distribution of electrical conductivity coefficient (in more general case — coefficient of magnetic diffusion) as the smooth function along one or two coordinate axes. Similar situation can be created in the process of metal sample manufacturing with a purpose to supply him the special properties. The preliminary theoretical analysis has been resulted a derivation of magnetic induction equation taking into account a presence of gradient for magnetic diffusion coefficient of medium and motion of medium. Equation is presented in non-dimensional form with obtaining of specific criterion of similarity which is equal to ratio of characteristic velocity of the field diffusion to the basic value of medium motion velocity. For the numerical analysis of process diffusion the software FlexPDE-7.20 has been chosen due to simple ability to introduce the gradient of the field diffusion coefficient into system of the field equations as pre-defined function of coordinates. The simulation model was looking as rectangular metal plate with pulsed excitation of field along one side. On the base of results of 1D and 2D simulation the authors demonstrate the set of specific properties of the field diffusion into the plate at growing or damping diffusion coefficient. There are considered also the influence of the metal plate motion on the process of the field diffusion, in particular effects of the field compression or decompression and capture of field by moving medium.
KEYWORDS
magnetic diffusion coefficient, two-component gradient, plane model, pulsed field, non-dimensional analysis, numerical solution
REFERENCES
- Kidder, R.E. (1959), Non linear diffusion of strong magnetic fields into a conducting half-space, University of California, CA, USA, Tech. Rep. UCRL-5467, available at: http:// hathitrust.org/cgi/pt?id=mdp.39015077594359;view=1up;seq=1.
https://doi.org/10.2172/4269476 - James, T.E. and James, D.C. (1995), “Resistive contact region solid armatures: Electro-thermal design optimisation”, IEEE Transactions on Magnetics, Vol. 31, no. 1, pp. 162-167.
https://doi.org/10.1109/20.364709 - Barber, J.P. and Dreizin, Y.A. (1995), “Model of contact transitioning with ‘realistic’ armature-rail interface”, IEEE Transactions on Magnetics, Vol. 31, no. 1, pp. 96-100.
https://doi.org/10.1109/20.364721 - Hsieh, K.-T. and Kim, B.K. (1997), “3D modeling of sliding electrical contact”, IEEE Transactions on Magnetics, Vol. 33, no. 1, pp. 237-239.
https://doi.org/10.1109/20.559961 - Hsieh, K.-T., Stefani, F. and Levinson, S.J. (2001), “Numerical modeling of the velocity skin effects: An investigation of issues affecting accuracy [in railguns]”, IIEEE Transactions on Magnetics, Vol. 37, no. 1, pp. 416-420.
https://doi.org/10.1109/20.911867 - Dreizin, Y.A. (1993), “Solid armature performance with resistive rails [railguns]”, IEEE Transactions on Magnetics, Vol. 29, no. 1, pp. 798-803.
https://doi.org/10.1109/20.195678 - Chemerys, V.T. (2013), “Key problems of railgun: New concept for their resolution”, Procedia Engineering, Vol. 58, pp. 377-383.
https://doi.org/10.1016/j.proeng.2013.05.043 - Chemerys, V.T. (2015), “Rail Accelerator as Continuous Commutation Process”, IEEE Transactions on Plasma Science, Vol. 43, no. 3, pp. 869-877.
https://doi.org/10.1109/TPS.2015.2399414 - Chemerys, V.T. (2020), “Specifics of Pulsed Magnetic Field Penetration Into Electrodes of Rail-Type Accelerator With Application of the Variable Conductivity in the Surface Layers of Rails at Uniform Acceleration of Solid Armature up to 2.5 km/s (Numerical Investigation in 2-D Model)”, IEEE Transactions on Plasma Science, Vol. 48, no. 7, pp. 2608-
https://doi.org/10.1109/TPS.2020.3001567 - Mayergoyz, I.D. (1998), Nonlinear Diffusion of Electromagnetic Fields (with Applications to Eddy Currents and Superconductivity), New York: Academic Press.
- Thambynayagam, M.R.K. (2011), The Diffusion Handbook: Applied Solutions for Engineers, 1st, McGraw-Hill, US.
https://doi.org/10.1016/B978-012480870-6/50003-X - Pramanik, A. (2014), Electromagnetism. Volume 2 – Applications, Magnetic Diffusion and Electromagnetic Waves, PHI Learning, India.
- Raychenko, A.I. (1981), Mathematical Theory of Diffusion in Applications, Naukova Dumka, Kyiv, USSR.
- Carslaw, H.S. and Jaeger, J.C. (1959), Conduction of Heat in Solids, Clarendon Press, Oxford.
- Crank, J. (1975), The Mathematics of Diffusion, Clarendon Press, Oxford.
- Nigmatulin, R.I. (1990), Dynamics of Multiphase Media, Vol. 1, Hemisphere Publishing Corporation.
- Oughstun, K.E. and Sherman, G.C. (1997), Electromagnetic Pulse Propagation in Causal Dielectrics, Springer-Verlag.
https://doi.org/10.1109/MAP.1996.500235 - Woodson, H.H. and Melcher, J.R. (1968), Electromechanical Dynamics, Massachusetts Institute of Technology, John Wiley & Sons, Inc.